 Product Introduction – GunnerYS Sealing Compounds |
 |
1. Index of Major GunnerYS Sealing Compounds
Type |
Color |
Temp. |
Viable Media |
| GunnerYS#3 |
Light Black |
0℃~300℃ |
Vapor, water, gas, coke oven gas, CH4, dimethylmethane, CO, CO2, H2S, oxygen, H2, N2, harshorn or ammonia, aldehyde, ketone, acid, alkali, etc. |
| GunnerYS#8 |
White |
-200℃~260℃ |
Benzene (toluene), aldehyde, ketone, aether, hydroxybenzene, liquefied petroleum gas, chlorine (gas or liquid), all kind of oil, acid, chemical gas and liquid a low temperature, almost every kind of media. |
| GunnerYS#11 |
Light Red |
80℃~380℃ |
Benzene (toluene), aldehyde, ketone, aether, hydroxybenzene, liquefied petroleum gas, chlorine (gas or liquid), all kind of oil, acid, chemical gas and liquid a low temperature, almost every kind of media. |
| GunnerYS#13 |
Dark Red (with brass wire) |
80℃~380℃ |
High-temp and pressure vapor, water, natural gas, coal gas, coke oven gas, CO, CO2, CH4, H2, N2, ammonia, acid, alkali, alcohol, etc. |
| GunnerYS#14 |
Black |
80℃~450℃ |
High-temp vapor, diesel oil, kerosene, lubricating oil, heavy oil, sediment oil, transformer oil, natural gas, coal gas, gasoline, coke oven gas, CO, CO2, CH4, H2, N2, ammonia, diluent acid, alkali, alcohol, etc. |
| GunnerYS#14B |
Black Gray |
300℃~800℃ |
High-temp and pressure vapor, water, diesel oil, kerosene, lubricating oil, heavy oil, sediment oil, transformer oil, hot oil, natural gas, coal gas, coke oven gas, gasoline, CO, CO2, CH4, H2, N2, ammonia, acid, alkali, alcohol, ester, etc. |
| GunnerYS#15 |
Black Gray (with fiber) |
300℃~800℃ |
High-temp and pressure vapor, water, diesel oil, kerosene, lubricating oil, heavy oil, sediment oil, transformer oil, hot oil, natural gas, coal gas, coke oven gas, gasoline, CO, CO2, CH4, H2, N2, ammonia, acid, alkali, alcohol, ester, etc. |
| GunnerYS#7A |
Black Gray (soft) |
0℃~900℃ |
Benzene (toluene), aldehyde, ketone, aether, hydroxybenzene, petroleum products, acid, vapor, all kind of chemical gas and liquid, high temperature smoke high temperature sediment oil, hot carrier (oil), etc. |
|
2. Sealing Compound Specification
Basic Specification: Cylinder: 22×85; slice: 40×5×any length; cream: contained in canister
Special supply: provided upon clients' requests |
3. Sealing compound reservation
(1) Avoid heat
(2) Avoid direct sunshine
(3) Avoid rain and water
(4) Reserve at normal ambient or 10-20℃. #7 and #8 need to be sealed. |
|
| |
|
|
| Product Introduction – Online Leak Sealing Special Tools |
| 1. Injection Tools |
| (1) Manual hydraulic reposition injection tool |
(2) Manual continual feed injection tool |
| Features: When pressure of the hydraulic pump relief, the injection gun pusher bar is automatically restored to its original position, saving time and manpower. |
May continuous feed injection sealants, saving time and manpower with high efficiency. |
 |
 |
| (3) Electrical continual feed injection tool |
(4) Air powered continual feed injection tool |
| Compared with Manual-pressured tools, such tools provide high flow rate and speed, applicable to large-size parts leak sealing featured by good design, compact appearance (10Kg), remote-controlled (3M), and operational safety. |
Such tools are driven by 0.5-0.7MPa compressed air; users can use their feet or hands to press or release the pedal to control the air in and out to control the operations of injection tools; it is easy to operate fast, applicable to flammable and explosive environment; it is also light and easy to carry. |
 |
 |
(5) High pressure injection valve, screw injection valve |
 |
 |
|
| 2. Operation Kit |
| (1) Banding Tools |
(2) G-type fixtures - Multipurpose Karambi |
 |
 |
|
3. Multi-function pipe connection and repair technique - pipeline repair device |
Multi-function pipe connector can be replaced by light industrial pipe connection methods. It is easy to install, dismantle, and save material and time, greatly reducing the cost of installation and dismantling. The pipeline repair device provides a simple alternative method to eliminate leakage. |
| Scope: Connecting and repairing piplines ★Diameter = 20 - 800mm ★Temperature = -30 - 140 degrees ★Pressure less than or equal to 2.5MPa ★Medium: water, oil, a variety of chemical gas liquids |
|
|
| 4. Hoops |
5. Clamps |
 |
 |
| |
|
|
| Product Introduction – Online Sealing Series Product Catalog |
| Categories |
Product |
Model, Specifications, Properties and Applications |
Unit |
Online
leak
sealing
special
protection
products |
Baby Antistatic Suit |
GS-JE-type during the operation, provided for the engineering staff work clothing to prevent static electricity. |
Set |
| Special high temperature resistant protective suits |
GS-JT-type selection of materials of Dupont, during water leakage operation, provided for high temperature protective clothing. |
Set |
| Siamese fire high-grade anti-chemical gas-tight suits |
GS-JS-type high-strength fabric as substrate material, the multi-layer anti-chemical coating material, the outer covering aluminum layer. |
Set |
| High temperature proof aluminum foil suits |
GS-JAT type in operation, in the case of a high temperature for the engineering staff to provide safe operation of the protective clothing |
Set |
| Waterproof clothing |
GS-JW-type during the construction process, there is leakage of water for the engineering staff to provide the protective clothing.
|
Set |
| Acid, alkali heat-resistant gloves |
GS-GL-type provides for the high temperature, acid, alkaline medium, such as long-sleeved protective gloves. |
Pair |
| High temperature proof gloves |
GS-GH-type |
Pair |
| Protective shoes |
GS-S-type, anti-oil, anti-skid, thermal insulation, anti-hit. |
Pair |
| Helmets with face masks |
GS-CF-type construction for the safety provided by a safe protective equipment. |
One |
| Noise earmuffs |
GS-ED-type in the construction process is often accompanied by noise, in order to protect workers hearing health, provided protective equipment. |
Pair |
| Anti-fog glasses |
GS-GV-type as a result of media leaks, operations often accompanied by water vapor, mist, such as special construction to facilitate the provision of this protective equipment. |
Pair |
| Categories |
Product |
Scope |
Torsion moment |
Pressure |
| mm |
N.m |
MPa |
Multifunctional
clamps |
Clamps |
Ф10-Ф280 |
16-40 |
17-0.9 |
| Pipe connector |
Ф20-Ф800 |
|
≤2.5 |
| Pipe repair device |
Ф20-Ф800 |
|
≤2.5 |
|
| Categories |
Product |
Model. Specifications. Properties and Applications |
Unit |
Online
leak
sealing
injection
tools |
Manual Automatic
Reposition injection tool |
By SYB-1 hand pressure pump, LPG-08 type automatic reset injection gun as well as tables, Block connectors, pressure gauge, 5M hydraulic hose, hydraulic quick connector component toolkit. |
Set |
Manual Consecutive
Feed Injection Tool |
By SYB-1 hand pressure pump, LPG-07-type guns, as well as continuous feed injection table, Block connectors, pressure gauge, 5M hydraulic hose, hydraulic quick connector component toolkit. |
Set |
Manual Consecutive
Feed Injection Tool |
ENERPAC P-392 by hand pressure pump and LPG-07-type guns, as well as continuous feed injection table, Block connectors, pressure gauge, 5M hydraulic hose, hydraulic quick connector component toolkit. |
Set |
Pneumatic Consecutive
Feed Injection Tool |
By ENERPAC PAT-1102N-type pneumatic hydraulic pumps and LPG-07 type continuous feed injection machine tools such as toolkit components. |
Set |
Electric row
Feed Injection Tool |
ELP-1 by the electric hydraulic pump and LPG-07 type continuous feed injection machine tools such as toolkit components. |
Set |
| Automatically Reset Injection Gun |
LPG-08 type, Ф22 × 85 injectable cylindrical sealant. |
One |
| Continuous Feed Injection Gun |
LPG-07 type, Ф22 × 85 injectable cylindrical sealant. |
One |
| Electric Hydraulic Pump |
ELP-1 type, 220/380V, 60MPa |
One |
| Manual Hydraulic Pump |
ENERPAC P-392 type 60MPa |
One |
| Manual Hydraulic Pump |
SYB-1 type 60MPa |
One |
| Pneumatic Hydraulic Pump |
ENERPAC PAT-1102 type 60MPa 0.5~0.7MPa compressed air-driven |
One |
| Manometer |
Pressure range 0 ~ 60MPa, shakeproof-type |
One |
| Table Block Joints |
PB-1 type, used to connect pressure gauges, hoses, fuel pumps. |
One |
| Hydraulic Quick Connectors |
LQ-1 type for high-pressure hose and injection guns, hydraulic quick connect between the pump and demolition. |
Set |
| Hydraulic High Pressure Hose |
LP-1 type, 5M, 60MPa with the pump connection.
LP-2 type, 10M, 60MPa with the pump connection. |
One |
| Injection Valve |
IV-10/12/14 type,M20-/M10/M12/M14 types, commonly: IV-12 type（M20/M12）, high pressure: IV-14 type（M20/M14） |
One |
| For the Joints |
CH-12 type, there are 90 ° and 120 ° in both directions, you can choose any one position into the sealant. |
One |
| Screw Joints |
BH-2 type, from the flange bolt and screw into the gap with sealant. There are a variety of specifications M12 ~ M30 connector. |
One |
| Pneumatic Drill |
AD-10 type, with about 0.5MPa of compressed air-driven may be in the field drilling, tapping and so on. |
One |
| Micro- Air Drill Accessories |
AP-2 type, with about 0.5MPa of compressed air-driven, can twist seam at the scene, such as embedded copper wire. |
One |
| Rechargeable Electric Drill |
BD-10 type, with fast charging batteries and charging devices. Do not take power, to the implementation of drilling, fastening, drilling Ф10MM maximum diameter. |
One |
| Bit Longer |
LD-1 type, there Ф3.5 × 150 Ф3.5 × 200 Ф3.5 × 220 three specifications. |
One |
| Air Quick Connector |
AQ-1 type, used for gas drilling, air drill with the compressed air source connected. |
Set |
| Air Duct |
AT-1 type, used for gas drilling, air drill with the compressed air source connected. Long 9 ~ 15M. |
One |
| Chisel |
SCH model, including a round flat chisel and chisel, and supporting the use of micro- air drill. |
Set |
| Belt Tightener |
TB-2 type, with steel in lieu of plugging fixture, there are taut and cut off the strip function. |
One |
| Stainless Steel Band |
STB-1 type, in order to 1Cr18Ni stainless steel or 304 stainless steel in Japan, and its specifications for the width 25 ~ 30mm, thickness 1 ~ 1.25mm. Length can be provided. |
One |
| Banding Steel Fixtures |
SC-1 type cards for the strip taut and tight specifications for use with the matching strip. Materials for carbon steel or chrome. |
One |
| G-type fixtures |
GC-2 type, flange tight to pay for the card, and the flange on the filler letter, thread leaking part on the use of direct injection of sealant. Their specifications in accordance with the size of Karambi sub-large and small two. Large-sized mount of about 120mm. |
Set |
|
|
|
|
